Large Semi-Circle Grey Sandstone Hearth

Stock Due in September 2018

Description

Large Semi-Circle Grey Sandstone Hearth is from the Grey Sandstone Hearths Range. The LARGE Semi-Circle Grey Sandstone Hearth/Floor Plate has been discontinued.

We offer the Semi-Circle Grey Sandstone Hearth in 2 different sizes as standard.

Small: 840mm x 840mm

Medium: 850mm x 1000mm

Bespoke sizes may be ordered up to a maximum 1000mm x 1150mm in either 30mm or 50mm thicknessess.

 

We have other Sandstone Hearths available so please see other listings and we supply this product unsealed, leaving the choice to you, when you receive it.

The Grey Sandstone hearth is 30mm thick however 30mm and 50mm are available to order as part of our bespoke service (up to 1150mm x 1000mm).

Price includes VAT & delivery to most destinations.

Additional charges may apply, depending upon the area, including but not exclusive to the following:
AB, BT, DD, IM, HS, IV, KW, PA, PH, PO30-41, ZE and will not be delivered on Next Day services.

This is a natural stone product and can have natural markings/blemishes within the stone.

We supply this product unsealed, leaving the choice to you, when you receive it.

The weight of the stone, together with the stove, should hold the hearth place so it is unlikely to require fixing. It should be noted that any sealant/fixing materials may cause the stone to change colour/mark, over time.

When handling the stone, you should hands are clean, to reduce the chance of marking the stone.

When siting your Woodburner, please ensure it is lifted carefully in to place and not dragged across the hearth. This will mark your hearth

Additional information

Dimensions1200 × 1000 × 30 mm
Width

1000mm

Depth

1200mm

Thickness

30mm

Important Requirement

All appliance installed with a glass hearth need an independent certification to verify it will not cause the glass hearth to exceed 100°C. The stove requires a manufacturers confirmation that it has been certified and the stove includes instructions suitable for a non-constructional hearth installation process

Important Guidlines

If installed on a combustible floor it is essential the hearth is at least 250mm thick (or 125mm thick with a 50mm air gap underneath). If however, the stove does not exceed the glass hearth's temperature to over 100ºC then the hearth thickness can be reduced to 12mm. Many stove manufacturers test their products and should be able to confirm whether the stove will cause the glass hearth to exceed a temperature of 100ºC or not. Most stoves that are installed with a log storage underneath are most likely to exceed the glass to over a temperature of 100ºC.